This version is no longer maintained
This is the documentation of v0.9, which is no longer actively maintained. See the latest version for up-to-date documentation.
Blue/green
This example demonstrates how to configure blue/green deployment on HAProxy Ingress controller, in order to route requests based on distict weight on deployment groups as well as selecting a group based on http header or cookie value.
Prerequisites
This document has the following prerequisite:
- A Kubernetes cluster with a running HAProxy Ingress controller v0.6 or above. See the five minutes deployment or the deployment example
Deploying applications
In order to the configuration have effect, at least two deployments, or daemon sets, or replication controllers should be used with at least two pairs of label name/value.
The following instructions create two deployment objects using run
label as the service selector
and group
label as the blue/green deployment selector:
$ kubectl run blue \
--image=jcmoraisjr/whoami \
--port=8000 --labels=run=bluegreen,group=blue
deployment "blue" created
$ kubectl run green \
--image=jcmoraisjr/whoami \
--port=8000 --labels=run=bluegreen,group=green
deployment "green" created
Certify that the pods are running and have the correct labels. Note that both group
and run
labels were applied:
$ kubectl get pod -lrun=bluegreen --show-labels
NAME READY STATUS RESTARTS AGE LABELS
blue-79c9b67d5b-5hd2r 1/1 Running 0 35s group=blue,pod-template-hash=3575623816,run=bluegreen
green-7546d648c4-p7pmz 1/1 Running 0 28s group=green,pod-template-hash=3102820470,run=bluegreen
Configure
Create a service that bind both deployments together using the run
label. The expose command need
a deployment object, take anyone, we will override it’s selector:
$ kubectl expose deploy blue --name bluegreen --selector=run=bluegreen
service "bluegreen" exposed
$ kubectl get svc bluegreen -otemplate --template '{{.spec.selector}}'
map[run:bluegreen]
Check also the endpoints, it should list both blue and green pods:
$ kubectl get ep bluegreen
NAME ENDPOINTS AGE
bluegreen 172.17.0.11:8000,172.17.0.19:8000 2m
$ kubectl get pod -lrun=bluegreen -owide
NAME READY STATUS RESTARTS AGE IP NODE
blue-79c9b67d5b-5hd2r 1/1 Running 0 2m 172.17.0.11 192.168.100.99
green-7546d648c4-p7pmz 1/1 Running 0 2m 172.17.0.19 192.168.100.99
Configure the ingress resource. No need to change the host below, bluegreen.example.com
is fine:
$ kubectl create -f - <<EOF
apiVersion: extensions/v1beta1
kind: Ingress
metadata:
annotations:
ingress.kubernetes.io/balance-algorithm: roundrobin
ingress.kubernetes.io/blue-green-deploy: group=blue=1,group=green=1
ingress.kubernetes.io/blue-green-mode: pod
ingress.kubernetes.io/ssl-redirect: "false"
name: bluegreen
spec:
rules:
- host: bluegreen.example.com
http:
paths:
- backend:
serviceName: bluegreen
servicePort: 8000
path: /
EOF
$ kubectl get ing
NAME HOSTS ADDRESS PORTS AGE
bluegreen bluegreen.example.com 80 11s
Test blue/green balance
Lets test! The following snippets use an alias hareq
declared below.
Change IP
to your HAProxy Ingress controller IP address:
$ IP=192.168.100.99
$ alias hareq='echo Running 100 requests...; for i in `seq 1 100`; do
curl -fsS $IP -H "Host: bluegreen.example.com" | cut -d- -f1
done | sort | uniq -c'
- BG Mode: pod
- BG Balance: blue=1, green=1
Replicas: blue=1, green=1
$ hareq Running 100 requests... 50 blue 50 green
Now changing green replicas to 3 and wait all the replicas to be running. BG Mode is pod, so the number of replicas will increase the load of the green deployment.
$ kubectl scale deploy green --replicas=3
$ kubectl get pod -w
- BG Mode: pod
- BG Balance: blue=1, green=1
Replicas: blue=1, green=3
$ hareq Running 100 requests... 25 blue 75 green
Changing to deploy mode. This mode targets the balance config to the whole deployment instead of single pods.
Note: BG mode was added on v0.7. On v0.6, the only supported mode is pod
.
$ kubectl annotate --overwrite ingress bluegreen \
ingress.kubernetes.io/blue-green-mode=deploy
- BG Mode: deploy
- BG Balance: blue=1, green=1
Replicas: blue=1, green=3
$ hareq Running 100 requests... 50 blue 50 green
Changing now the balance to 1⁄3 blue and 2⁄3 green:
$ kubectl annotate --overwrite ingress bluegreen \
ingress.kubernetes.io/blue-green-deploy=group=blue=1,group=green=2
- BG Mode: deploy
- BG Balance: blue=1, green=2
Replicas: blue=1, green=3
$ hareq Running 100 requests... 33 blue 67 green
The balance will be the same despite the number of replicas:
$ kubectl scale deploy green --replicas=6
$ kubectl get pod -w
- BG Mode: deploy
- BG Balance: blue=1, green=2
Replicas: blue=1, green=6
$ hareq Running 100 requests... 33 blue 67 green
Test blue/green selector
Blue/green selector requires HAProxy Ingress controller v0.9 or above.
Follow the deployment and configuration instructions to deploy the sample application.
After that, add the following annotation:
$ kubectl annotate --overwrite ingress bluegreen \
ingress.kubernetes.io/blue-green-header=x-server:group
Create (or update) the hareq
alias. Change IP
to your HAProxy Ingress controller
IP address:
$ IP=192.168.100.99
$ alias hareq='echo Running 100 requests...; for i in `seq 1 100`; do
curl -fsS $IP -H "Host: bluegreen.example.com" -H "X-Server: $GROUP" | cut -d- -f1
done | sort | uniq -c'
Choose blue
group:
$ GROUP=blue
The envvar GROUP
will populate the X-Server
header with the value blue
.
Run the requests:
$ hareq
Running 100 requests...
100 blue
Choose green
group:
$ GROUP=blue
$ hareq
Running 100 requests...
100 green
Choose an invalid group, the configured blue/green balance will be used:
$ kubectl annotate --overwrite ingress bluegreen \
ingress.kubernetes.io/blue-green-deploy=group=blue=1,group=green=3
$ GROUP=invalid
$ hareq
Running 100 requests...
25 blue
75 green